Filpro指示器、Filpro连接

    T4T5支架老化线
    一、设备项目: T4T5支架老化线
    二、规格参数:12000L×1400W×800H(mm)
    三、数    量:1条
    四、设备结构:环型链条输送、链板式老练、变频调速
    五、功能特点:本设备**于T5 T4支架的老练,通过对支架的高压、常压、低压、漫游、冲击高温等电压区的老练。根据欧美等不同地区电压,可老化110V的支架。电压调节范围宽,动力系统采用变频调速系统,操作方便。
    六、基本配置和构造:
    1. 动力:电机采用闽台产1.5KW的电机, 100型WPS1:60的减速机,闽台进口爱德利2HP变频器,变频无级调速,线速度0—6M/min可调。
    2. 机身、机架:机架采用50×40钢管焊接制作而成;机身上下护边采用130×23老化线**铝合金型材,护板采用1.5mm的冷板折弯制作而成,支脚配镀锌可调脚杯。
    3. 输送链条:采用上海链条厂出产的C212一寸双节距单则耳双孔链条。每条长约20米。
    4. 老化链板:采用2mm冷板弯轧成1400×148×18mm,全线共140块,每块板装4套快速灯管**灯管接插头和灯管卡夹具,灯管接插头分600mm、900mm、1200mm三种规格;并配装6A高分断小型断路器;链板底部安装二路导电系统(铜质),每路安装两个导电块,每块板共装2个。
    5. 日产量:本老化线一次可同时老化560套支架,老化时间约为一个小时;每天按工作10小时计算,一天的产量为5600套支架。
    6. 导电槽:全线上下各配二路导电槽轨,采用绝缘胶板,装配不锈钢导电条。
    7. 挡光罩:在线体面上设挡光护罩,采用**玻璃板与铝型材组合而成。有效的衰减节能灯强光,更好的保护眼睛。
    8. 恒温区:恒温系统采用电加热式完成,设一段两个2000W/套电热式发热盘,温度自动恒温常温-80℃,数字温控指示。
    9. 全线电压区:10KW共 4个调压器,线体共设计6个区,调压器3个0—250V可调,1个调压器0—300V可调。(具体分布按甲方要求而定)。
    10. 电器控制:电压、温控指示采用数字显示式,整个系统采用PLC控制,调压器4个,采用1个配电控柜安装。在拉身上配急停开关方便上灯时能即时停止。
    11. 机体颜色:全线链板黑色喷塑,铝合金型材为原色,其余为电脑白色。
    以上是老化线的详细信息,如果您对老化线的价格、厂家、型号、图片有什么疑问,请联系我们获取老化线的较新信息。
    英文流水线标准方案:
    PVC Horizontal Belt Assembly Line Production Plan & Quotation
    I. Project: Connected Type PVC Belt Conveyer
    II. Dimensions: 12000L × 500W ×730H (mm)
    III. Quantity: 3 set
    IV. Features: PVC belt Conveying, roller driving, electromagnetic
    speed control
    V. Functional features: This equipment is applicable to various
    plants with flow production for small-medium size material
    conveying. The driving system adopts electromagnetic speed regulation system, which is stable,
    secure, convenient and quiet.
    VI. Material Selection and Remarks
    1. Power: The motors use Hongling Brand 0.75KW motors manufactured by Jiangmen Motor Co.,
    Ltd, Yashiba Brand 70 model 1:40 peed reducer made in Taiwan, Wuzhou Brand magnetic speed
    regulator with stepless speed regulation. Linear speed at 0-2M/min may be regulated freely.
    2. Machine body and stand: made of 50×40 rectangle steel pipe by welding. Supports are made
    with ?25mm galvanized roller, arranged with pitch of 25mm. The stand bars are equipped with
    galvanized adjustable cells. Machine head and tail are made of 1.2mm cold plate, and the machine
    body is 2m per section.
    3. Conveying belt: quality green lightweight conveying PVC belt imported from Holland, 2mm
    thick, 500mm wide, total 12m long, which is of seamless thermal shrinkage ring connection.
    4. Light stand and lighting: H-shape light stand, one per 2m, made of 40×20×1.5mm rectangle
    steel pipe, 1.26m high, with 2000×50×25×0.8mm coated traceway for connecting power. The
    40W single daylight lamp tube stand is used, with one stand per 1.4m, arranged along both sides.
    5. Worktable: Long worktable of 730×490×730mm, table board made 15mm plywood, affixed
    with blue fire-resistant board on face and T-shaped plastic edge; supports legs made of
    25×25×1.5mm rectangle steel pipe, fixed with galvanized adjustable soles at the bottom. L25mm
    angle iron arranged along two sides of machine.
    6. Work Power: made of 2000×50×25×0.8mm galvanized traceway, set under the machine belt,
    with triphase and biphase sockets along two sides (1m/one socket).
    7. Operation card: Two operation card stands are set under the light stand, made of H-shape
    aluminum guide rail. At each work position is arranged a 300×400×1.5mm transparent glass.
    8. Gas pipe: A gas supply pipe is set in the middle of light stand, made of 4cm galvanized water
    pipe, with one tap and plug per 1m.
    9. Machine body color: Machine metal surface will be of fruit-green coating or (other colors are


    上海航欧机电设备有限公司专注于编码器传感器开关继电器电机泵阀等, 欢迎致电 13816911191

  • 词条

    词条说明

  • TITGEMEYER铰链MTMF0W00

    上海航欧专业销售TITGEMEYER铰链、TITGEMEYER螺栓TITGEMEYER拴式螺钉TITGEMEYER镶嵌件TITGEMEYER镶嵌支架TITGEMEYER装配部件TITGEMEYER拉手TITGEMEYER助推上海航欧机电设备有限公司专业从事进口机电设备、仪器仪表等疑难备品备件的销售,是经营世界各地进口设备机电配件的现代化企业。上海航欧公司与众多知名品牌电子元件供应商建立有极其良好的

  • APPLIED MOTION电缆3004-300-10M

    上海航欧销售APPLIED MOTION编码器APPLIED MOTION电机APPLIED MOTION驱动器APPLIED MOTION马达APPLIED MOTION电缆APPLIED MOTION伺服电机APPLIED MOTION步进电机上海航欧机电设备有限公司从事进口机电设备、仪器仪表等备品备件的销售,是经营世界各地进口设备机电配件的企业。上海航欧公司与众多电子元件供应商建立有良好的合

  • camlogic传感器MPFG57

    上海航欧销售camlogic液位计camlogic传感器camlogic液位表camlogic液位开关camlogic开关camlogic液位计camlogic传感器camlogic液位表camlogic液位开关camlogic开关主要型号:PFG05F1122 AC2PVC3/PCP051500AC4PVC1、AC4INOX1、AC2PVC3、AC1PVC1、AC1INOX1、AC3INOX4、

  • GAT给油器HN2003451

    上海航欧销售GAT油缸 GAT接头 GAT给油器 GAT滑环 GAT马上海航欧销售MAE泵MAE电机MAE马达MAE控制器MAE模块上海航欧机电设备有限公司从事进口机电设备、仪器仪表等备品备件的销售,是经营世界各地进口设备机电配件的企业。上海航欧公司与众多电子元件供应商建立有良好的合作关系,在欧美、日本等地形成了稳定的供应网络,良好的供应商关系和多年的行业经验,使我们在价格及货期上有优势。经销产品

联系方式 联系我时,请告知来自八方资源网!

公司名: 上海航欧机电设备有限公司

联系人: 豆严**

电 话: 021-51085161

手 机: 13816911191

微 信: 13816911191

地 址: 上海上海市中江路388弄国盛中心1号楼905室

邮 编:

网 址: shhangou.cn.b2b168.com

八方资源网提醒您:
1、本信息由八方资源网用户发布,八方资源网不介入任何交易过程,请自行甄别其真实性及合法性;
2、跟进信息之前,请仔细核验对方资质,所有预付定金或付款至个人账户的行为,均存在诈骗风险,请提高警惕!
    联系方式

公司名: 上海航欧机电设备有限公司

联系人: 豆严**

手 机: 13816911191

电 话: 021-51085161

地 址: 上海上海市中江路388弄国盛中心1号楼905室

邮 编:

网 址: shhangou.cn.b2b168.com

    相关企业
    商家产品系列
  • 产品推荐
  • 资讯推荐
关于八方 | 八方币 | 招商合作 | 网站地图 | 免费注册 | 一元广告 | 友情链接 | 联系我们 | 八方业务| 汇款方式 | 商务洽谈室 | 投诉举报
粤ICP备10089450号-8 - 经营许可证编号:粤B2-20130562 软件企业认定:深R-2013-2017 软件产品登记:深DGY-2013-3594
著作权登记:2013SR134025
Copyright © 2004 - 2025 b2b168.com All Rights Reserved