东莞精丰电子有限公司
联系人:周先生
联系电话:
QQ:
T:
F:
邮编:523710
地址:东莞塘厦镇塘龙东路63号美华中心0126
54100A系列网络分析仪可提供设备特性。设备包括:放大器、天线、适配
器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤
器等。先进的软硬件特性可加速生产力和提高准确性。结合自动波段搜索功能
加快调节速度。低源同步和高指向性SWR自动测试仪确保准确。
★**准确的测量传输、返回损耗及**性返回损耗、SWR、群延迟、**功率
和距离误差。
★晶体源特别稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实**的机箱
★传输收益(损耗),群延迟和功率测量
★传输及返回损耗(或SWR)
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统(0.001-1.5GHz)
特 点:
54100A系列网络分析仪可提供设备特性。设备包括:放大器、天线、适配
器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤
器等。先进的软硬件特性可加速生产力和提高准确性。结合自动波段搜索功能
加快调节速度。低源同步和高指向性SWR自动测试仪确保准确。
★**准确的测量传输、返回损耗及**性返回损耗、SWR、群延迟、**功率
和距离误差。
★晶体源特别稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实**的机箱
★传输收益(损耗),群延迟和功率测量
★传输及返回损耗(或SWR)
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统(0.001-1.5GHz)
技术指标:
Analyzer Measurement modes Transmission(dB),return loss(dB),SWR
(linearSWR),optiona group delay(ns),power(dBm)precision return loss
(dB) and optionaldistance-to-fault Dynamic range -55 to +16dBm,
autozeroing with DC detection Inputs Three,two standard inputs,A and
B,with optionathird reference channel,R(Option 5) Display channels
Two channels are used to select and simultaneouslydisplay any two
inputs fromA,B,or inputs can also be displayed asratios A/R or B/R.
Scale resolution 0.1 to 10dB(m) per division in 0.1dB steps Cursor
functions Searches for trace maximum,minimum,dB level,dBbandwidth,next
marker and active marker Averaging 2,4,8,16,32,64,128,or 256 Limit
lines Two limit ines,either single value or multilevel segmented,for
each lines may be made from up to 10individually
editable segments.
Auto-zero Performs an AC modulation cycle and lowlevel calibration
during sweeper ratrace Save/Recall Thirteen sets of front panel set-
ups andthirteen sets of trace memory can be stored in non-volatile
instrument memory.
Trace mask A swept frequency measurement can be storedto a graticule
trace mask for visual comparison to later measurements.
Disk drive Built-in 3.5 inch,1.44MB floppy disk drive
Autosave Automatically increments the trace datafile name and reference
number during successive data storage operationsto the DOS disk
Source Frequency range 1Mhz to 110GHz,model dependent
Alternate sweep Sweep alternately between frequenc yrangesset differently
for channel 1 and channel 2 CW Provides single frequency output(both
channelsturned off) Frequency resolution Rf Model(54107A,54109A,54111A):1
0kHz,Microwavemodels:100khz Output power Maximum guaranteed levelled
output poweris model dependent.
Reverse power protection UP to 5 to 1 Watt with attenuatoroption
Appli-cation function Min/Max hold Save the minimum and maximum values
of successivesweeps or the combination of the two Cursor functions
Automatic cursor seach updates the bandwidth,minimum,ormaximum levels
of the displayed trace.
Compression test automation Determines the gain compression point
overthe op
词条
词条说明
家用中央空调耗电量高吗,很多人都认为中央空调是**品,不仅成本高昂,耗电量也很惊人。其实这是消费者一直存在的误区,家用中央空调耗电量并没有想象中的那么高,特别是大户型和别墅类住宅,家用中央空调较普通空调耗电量要小的多,家用中央空调更加节能。 淄博科诺冷暖设备工程有限公司经过强化培训的**服务工程师,强大的技术支持队伍,丰富的备件采购渠道和物流派送中心,是科诺冷暖客服中心强有力的的后台支持。 淄博
中央空调风口安装及注意事项: 1.中央空调安装与室内装修同步进行,风口的尺寸并不固定,一般宽度是可定的,长度要根据房屋实际情况变动。 2. 应在封面刷漆前安装,这样既不怕弄花墙壁,也能在刷漆时将百叶与墙壁之间的缝隙填满,做到外观一体化。 3. 风口处不要设置灯槽,避免阻挡热气流散发,影响中央空调制热效果。 4. 冬季制热将横向百叶调整为45°角较为适宜,制热效果zui好。 5. 风口易积累污垢,
家用中央空调现今已普遍出现于别墅、小高层等住宅内,而相比分体式空调机,它有一个较**的优势,那就是中央空调能实现隐蔽安装,室内只留出风口,不仅符合人们对于室内装修风格的美观及统一要求,更能让置身其中的人享受到舒适的温度。 中央空调出风口材质主要有木质材料、铝合金材料、ABS材料几种,各有优缺点,消费者可以根据自身需要进行选择。一般家庭选用铝合金材质风口的较多,比较注重装修风格的家庭可以选择木质风
公司名: 淄博科诺冷暖设备工程有限公司
联系人: 孙雷
电 话: 0533-3167318
手 机: 13969363859
微 信: 13969363859
地 址: 山东淄博淄博市开发区张桓路22号
邮 编: 255000